Tag Archive: IrfanView

Akismet and Jetpack Issues, Stop Spammers and CloudFlare Save the Day

My Web Host Penalised Me Yet Helped Speed Up My Site

Introduction

shared web hosting

shared web hosting

This site used to be hosted on Site5, in Texas.  I had a shared web host account, about the cheapest there is on Site5 though by no means the cheapest around (I’ve had experience of really cheap hosts….).  It worked alright, site management was good.  Then, I got hit by spammers.  Twice.  Big time.

Each time, this slowed the site down, made life hell for other shared accounts, especially when I introduced WordPress plugins to counter this.

Naturally, Site5 advised me to stop the hits or they’d pull my account (they’d already temporarily disabled it).  They advised me to cut the plugins, using GoDaddy’s plugin testing tool, WordPress Plugin Performance Profiler (P3).  So I did this, and after some trial and error, got the running processes down.  Of course, I lost a bit of neat functionality.

Testing Times

Apart from internal WordPress testing, it pays to test your site as if you are someone else somewhere else.  Pingdom have a set of tools that does just this, testing from various global locations and I can recommend it.

Result!

I used an iterative approach, testing various combinations of plugins and systems to end up as being in the top 8% sites for speed in the world!  Not bad for free is all I can say!   You’ll see in the screenshot above, that 92% of websites are slower than mine….   So is it really free?  Here goes…..

Paid For:
  • Web Hosting.  Shared.
  • My domain registration.
Free:
  • WordPress and all the LAMP functionality
  • WordPress plugins
  • CloudFlare
Pingdom Says

Pingdom Says

Automattic Issues

WordPress (which this site uses) is built by the Automattic team and naturally have expanded over time.  I’ve used their plugins for many years, Akismet from the off, which is a comment spam blocking system.  Latterly, they came out with Jetpack, where they say,

Supercharge your WordPress site with powerful features previously only available to WordPress.com users.

Jetpack is a WordPress plugin that supercharges your self-hosted WordPress site with the awesome cloud power of WordPress.com.

P3 Selected Output

P3 Selected Output

This is all well and good, except when I tested it using the P3 plugin profiler, Jetpack was the biggest drag on everything!   The worst part of it, was that actually, I was only using a small part of its features and it was still the biggest suck on performance.

  • I didn’t use Carousel for photos since I had an old solution, NextGen Gallery, that I’m loathe to change.
  • The comments system mucked up all other comment plugins, grabbing all for itself (a bit like Microsoft here!)
  • I used the stats, and that was about all, yet they were very slow and not that informative, actually.
  • Nearly all the other stuff I looked at, tried and ditched for similar reasons.

So much for the awesome cloud power.  On top of this, you’re now supposed to pay for parts of Automattic’s offerings, like Akismet, the comment spam blocker while a major offering of theirs was actually slowing my site right up!

What Did I do?

Change host!

Well not initially, actually, though the heavy-handed Site5 approach got my ire a bit I must admit.  I did do loads of tests with a host of caching, anti-spam and page load improvement plugins first…

Vidahost

Vidahost

I now use Vidahost in the UK.  The site is faster to manage (along with my others) since the servers are in the UK with me, and it’s cheaper, providing almost the same functionality and tools as Site 5.  I took the opportunity to clean out a few dead files in the process, but essentially, all was moved, database and files.  The lot.  Just twiddled config.php and the .htaccess file a bit.

did worry that my American visitors, who are actually in the majority, would  suffer slower speed and thus I’d get hit in Google rankings, but hey, wait for later…!

I got it all working and as part of the whole “thinking” process since the very first warnings from Site 5, I’d been looking for better things.

Looking at Things Closely

  • I like Related Posts.   Related Posts plugins do just that.  I love the idea of pulling out meta-data relevant stuff from a website.  Site 5 had said, as have others on the web, that this sort of plugin makes big hits on a site.  Some of them really do!  I use  YARPP, with a limited subset of features enabled which cuts down processing.
  • I also like Andrew Ozz’s Shutter Reloaded which shows images nicely.   I also like his post editor, TinyMCE Advanced, it being the best of many I’ve tested over the years.
  • I like NextGEN Gallery having used it since before WordPress got all image fancy.  I haven’t got time to fiddle with thousands of photos now…
  • I’d like some statistics within WordPress.
  • I’m not that interested, any-more (though I was) in Social Networking sharing features.  Truth be told, if someone wants to share, they will.
  • I’ve read a lot on image improvements.  I’ve always shrunk images manually before uploading using the excellent IrfanView application.  But during this enforced research, other things like sprites and delayed image loading popped into the equation.

So I like certain plugins or functionality.  I try and use the one that works best for me.  Too many plugins make a big hit on the server and thus website loading.

Caching

A way round this is caching.  e.g. If a post is created and has related posts clagged on the bottom using YARPP, then the post is cached and YARRP is only running once.  How and where the caching is done is the crux of the issue…

Site 5 suggested W3 Total Cache as a better alternative to Wp Super Cache,  which I’ve used for years.    Naturally, I’ve tested this and my conclusion was that it could be fast, and it was fast for a while, but over time on each of my sites I got issues around lock-ups and the huge and complex caching system around files, databases and sprites.  This list is long.

I’ve also tested various database query caching plugins likewise over the years.  W3 Total Cache incorporates this method too, but ultimately, it made too much work for not a lot of difference IMHO, since I’m lazy.

However, it did point me to one thing!  CloudFlare.

CloudFlare

CloudFlare Admin1

CloudFlare Admin1

Ah.  The power of the cloud is back!

Not only that – it works!

CloudFlare Admin2

CloudFlare Admin2

You re-direct your DNS at your domain registrar (joker.com in my case) to CloudFlare’s DNS servers, set up the site malware protection level you want – then after a few hours your whole site is cached and protected.  Best of all, it’s free for a little site like this!

In fact, using CloudFlare speeded everything up even before I got caching going again…

Further Plugin Work

Now, I went back to Wp Super Cache from Doncha and it all works fine.  Site speed good.  I then ditched Jetpack after testing it again.  It really does interfere with all comment plugins, and I really like this comment one as do people who comment here:

  • U Extended Comment

It works great and does everything I want.  So Jetpack, it’s bye bye.  Take all your fancy commenting system, your stats, your social media and fancy image handling.

But What About Comment Spam?

Stop Spammer Results2

Stop Spammer Results2

Stop Spammer Results1

Stop Spammer Results1

I’ve found the best solution is a plugin called Stop Spammer Registrations Plugin.  It needed a bit of fine tuning and a re-activation of Akismet to whip out a few wisps of spammer, but it works and seems to trap and report more spammers than ever Akismet did alone.  Akismet, by itself, does the commenting bit in tandem with the plugin, rather well.

Registration Spam

SABRE Results

SABRE Results

Unfortunately, during testing, a few unwanted visitors managed to register on the website.  They can’t do real harm since I use the lowest role level at registration time.  So I re-enabled SABRE and since then, no more unwanted visitors.  I’ve tested SABRE as a visitor and the settings I’ve chosen are just about right – I’ve had issues with it previously when it blocked registration!  But reducing the feature set and re-uploading a clean plugin fixes that.

CloudFlare and the CDN Issue

I toyed around getting a CDN to host images.  But they (can) cost and anyway, I’ve gone off Amazon and others because of their anti-Wikileaks actions plus they don’t pay UK tax…

Delayed Image Loading

However, in the course of my reading, I found that images can be loaded just as the page comes into view, which speeds up page loading, and as a consequence the perceived nippiness of a site.  The plugin BJ Lazy Load does this for me and works brilliantly.  Check this last post about Australia which has a lot of medium sized images to see them pop into view!

Delayed Javascript Loading

I use two plugins that handle this end of the issue around JavaScript.

Statistics

WP SlimStat1

WP SlimStat1

Well, Jetpack is gone.  I won’t be using it unless some serious improvements are made, it being the prime reason for the server load that brought me to this position in  the first place.  As soon as I disabled it (and simultaneously blocked all comments to the site, which isn’t the best thing, this being a blog after all), all server loads went away.

I now use SlimStat and it works very well.  I’ve tried many over time, including Google’s analysis tools, my webhost’s stats tools, Wassup and more, but for now, this is it.

Conclusion

My site works pretty fast and is pretty protected from the bad guys.  I actually still use more plugins than what is usually recommended – 50 is a huge lot according to web gurus and sages.  Currently there are 31 in active operation with 8 inactivated.  I love trying new ones, it’s like that, that’s just the way it is.

The delayed image loading is particularly apparent on a post with a lot of images, say this recent one.  The post loads fast and you see the first images load, and as you scroll down you’ll see other images appear with a slight delay.

All the other stuff is incremental improvement, with the biggest, by far, being the free CloudFlare service which I cannot recommend highly enough.  It’s a no-brainer, go and do it?

My Full List?

These are the plugins currently running that help my site work.  Many are for security, which demonstrates the state of play versus the bad internet guys full well.

Related Posts:

Picnic at The Engine House

Strangely post on August 17th, 2009
Posted in Buddhism Tags: , , , , , , , , , , ,
Picnic at the Engine House #1

Picnic at the Engine House #1

Picnic at the Engine House #2

Picnic at the Engine House #2

Assorted pictures taken on my Panasonic Lumix DMC-TZ5 yesterday.  All photos are 16:9 wide-screen resolution, batch resized using Irfanview from the initial 3712 x x2088 to a maximum dimension of 1024 pixels and set to 85% jpg compression.  This means they should have a reasonable load time in the browser and display adequately.  Some back-lighting  is used using that inbuilt facility of the camera, and it works quite well.  Flash isn’t used at all.

These top two pictures are group shots at maximum resolution, >3Mb each – do not click if you’re on dial-up! the gallery below is the smaller pictures….

[nggallery id=35]

Related Posts:

Comments are closed

Site Rework – Header Photo Gallery for the Curious,

Introduction

[nggallery id=31]

I’ve been busy this weekend having a twiddle with the site appearance.  I got a bit fed up with dragons so now it’s an anachronistic mix of Edinburgh Rock shades and the Gallows!  There are a shedload of random photos sliced into the header taken by me, Strangely Perfect, using my new Panasonic TZ5.  Over time, I’ll probably add some more photos, both earlier and newer.  Each page refresh plonks up a new one.  The slices are a fairly random crop of the source pictures using Irfanview in batch mode.  This has produced some interesting effects for me – as with my music, I like the spontanaeity!

I’ve uploaded the source photos sized to a max dimension of 800 pixels to the gallery shown for those that are curious.  All photos are from Somerset and Northumberland.

Related Posts:

Comments are closed

Badger in Bridgwater

Strangely post on June 23rd, 2008
Posted in Environment Tags: , , , , , , , , , , , , , , , , ,
Badger Wide Shot

Badger Wide Shot

Finally, after many times nearly standing on the thing while out walking the dog late at night, I’ve got a picture of our local badger!  Turning down to the canal in the pitch dark I nearly stood on it again – and it gave the dog a shock as well.  I don’t know what George the dog expects to happen by chasing after it, but the badger seems really confident and will scuttle off down the footpath, pursued by the dog, till it’s just out of “range” and then continues doing it’s scuffling around in the undergrowth while the dog returns to doing his doggy thing of sniffing, pissing and shitting…  Badgers are supposed to be tenacious when biting so I was quite pleased that it continued running away from me. :-?

Badger closeup

Badger closeup

Anyway, I knew old Brock was ahead so I set my camera to wide angle and flash, then held it against my chest while walking along.  This had the dual effect of cutting out light from the back display, so I’d appear darker, and also, so I would be ready for any movement.

When I heard it I clicked.  Wahay!

You’ll see that the badger has turned towards the camera.  I think it was attracted by the clicketty-clicketty sounds the camera makes as it’s auto-ranging etc just before the flash comes on.  So a bit of a bonus there. :-)

My camera is a dinky little thing – a Fuji Finepix F30.  I always leave the settings at max so that I can crop the subject and still leave reasonable resolution.  It’s a neat little tool that easily fits in my pocket and takes shots at really low light levels – although when it’s like that, I can’t actually see anything in the viewfinder. 8-O

I nearly always crop, resize and re-compress pictures using Irfanview, which is free and about the best there is to get things done in a hurry and/or in batches.  Unless I’ve been really remiss, I usually set the maximum dimension of a picture to 800 pixels and the picture type as jpg @ 85% compression.  These are no different and are 800×600 so should show and load quite well when the java kicks in to blow up the thumbnails.

Related Posts:

© 2007-2017 Strangely Perfect All Rights Reserved -- Copyright notice by me